Completed Projects

ATC Project No. Project Title Funding Agency
ATC-15-13

14th U.S.-Japan Workshop on the Improvement of Structural Design and Construction Practices

Applied Technology Council (ATC)
ATC-15-14

15th U.S.-Japan Workshop on the Improvement of Structural Engineering and Resiliency

Applied Technology Council (ATC)
ATC-15-15 16th U.S.-Japan-New Zealand Workshop on the Improvement of Structural Engineering and Resiliency Applied Technology Council (ATC)
ATC-15-16 17th U.S.-Japan-New Zealand Workshop on the Improvement of Structural Engineering and Resiliency Applied Technology Council, Japan Structural Consultants Association, New Zealand Centre of Research Excellence (QuakeCoRE), and New Zealand Society for Earthquake Engineering
ATC-20

Procedures for Postearthquake Safety Evaluation of Buildings

Applied Technology Council (ATC)
ATC-20-1
Bhutan
Development of Field Manual: Postearthquake Safety Evaluation of Buildings, Bhutan Edition World Bank’s Global Facility for Disaster Reduction and Recovery (GFDRR)
ATC-45

Field Manual: Safety Evaluation of Buildings After Wind Storms and Floods

Applied Technology Council (ATC)
ATC-52-2
(CAPSS)

Community Action Plan for Seismic Safety (CAPSS) Project

San Francisco Department of Building Inspection
ATC-58 Series Development of Next Generation Performance-Based Seismic Design Procedures for New and Existing Buildings Federal Emergency Management Agency
ATC-60

SEAW Commentary on Wind Code Provisions

Structural Engineers Association of Washington
ATC-62

Advanced Seismic Analysis Methods – Resolution of Issues

Federal Emergency Management Agency
ATC-63

Quantification of Building Seismic Performance Factors

Federal Emergency Management Agency
ATC-63-1

Quantification of Building System Performance and Response Parameters - Development and Beta Testing of Component Equivalency Methodology

Federal Emergency Management Agency
ATC-64

Development of Design and Construction Guidance for Special Facilities for Vertical Evacuation from Tsunamis

Federal Emergency Management Agency
ATC-66 Series NETAP (National Earthquake Technical Assistance Program) Training Federal Emergency Management Agency
ATC-67-4

Rapid Observation of Vulnerability and Estimation of Risk

Federal Emergency Management Agency
ATC-69 Series

Development of FEMA E-74, Reducing the Risks of Nonstructural Earthquake Damage - A Practical Guide

Federal Emergency Management Agency
ATC-71

Update Seismic Rehabilitation Guidance Program Definition and Guidance Development

Federal Emergency Management Agency
ATC-71-1

Development of FEMA P-807, Seismic Evaluation and Retrofit of Multi-Unit Wood-Frame Buildings With Weak First Stories

Federal Emergency Management Agency
ATC-71-2

Planning and Conduct of an Earthquake Building Performance Rating System Workshop

Federal Emergency Management Agency
ATC-72

Development of Guidelines on Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings

Pacific Earthquake Engineering Research Center
ATC-75

Development of Industry Foundation Classes (IFCs) for Structural components

Charles Pankow Foundation
ATC-76-1 Quantification of Building System Performance and Response Parameters. This task has been completed and produced the NIST GCR 10-917-8 report, Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors. National Institute of Standards and Technology
ATC-76-5 Integration of Collapse Risk Mitigation Standards and Guidelines for Older Reinforced Concrete Buildings into National Standards - Phase I. This task has been completed and produced the NIST GCR 10-917-7 report, Program Plan for the Development of Collapse Assessment and Mitigation Strategies for Existing Reinforced Concrete Buildings. National Institute of Standards and Technology
ATC-76-6 Improved Nonlinear Static Seismic Analysis Procedures - Multiple-Degree-of-Freedom Modeling. This task has been completed and produced the NIST GCR reports, 10-917-9, Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design, and Supporting Documentation. National Institute of Standards and Technology
ATC-78 Series Identification and Mitigation of Nonductile Concrete Buildings Federal Emergency Management Agency
ATC-79/79-1

Technical Assistance and Documentation of Case Studies, FEMA Guidelines for the Design of Structures for Vertical Evacuation From Tsunamis

Federal Emergency Management Agency
ATC-81

Development of Industry Foundation Classes (IFCs) for Structural Concrete Components - Strategic Plan

ACI Foundation
ATC-86

Environmental Benefits of Retrofitting

Federal Emergency Management Agency
ATC-99

Methodology to Assess and Verify the Seismic Capacity of Low-Rise Buildings

Federal Emergency Management Agency
ATC-99-1

Methodology to Assess and Verify the Seismic Capacity of Low-Rise Buildings

Federal Emergency Management Agency
ATC-102 Development of an Earthquake-Resilient Lifelines: NEHRP Research and Implementation Roadmap National Institute of Standards and Technology
ATC-103 Development of Technical Brief on Structural Design Issues – Seismic Design of Steel Special Concentrically Braced Frame Systems. This task has been completed and produced the NIST GCR 13-917-24 report, Technical Brief No. 8, Seismic Design of Steel Special Concentrically Braced Frame Systems: A Guide for Practicing Engineers. National Institute of Standards and Technology
ATC-106-1 Seismic Behavior and Design of Deep, Slender Wide-Flange Structural Steel Beam-Column Members: Phase 2 Experimental Evaluation National Institute of Standards and Technology
ATC-109 Building Safety Evaluation after the February 22, 2011 Christchurch, New Zealand Earthquake: Observations by the ATC Reconnaissance Team Applied Technology Council (ATC) and
ATC Endowment Fund
ATC-111 Development of Technical Brief on Structural Design Issues – Special Reinforced Masonry Shear Walls. This task has been completed and produced the NIST GCR 14-917-31 report, Technical Brief No. 9, Seismic Design of Special Reinforced Masonry Shear Walls: A Guide for Practicing Engineers National Institute of Standards and Technology
ATC-112 Development of Technical Brief on Structural Design Issues – Wood Light-Frame Structural Diaphragm Systems. This task has been completed and produced the NIST GCR 14-917-32 report, Technical Brief No. 10, Seismic Design of Wood Light-Frame Structural Diaphragm Systems: A Guide for Practicing Engineers National Institute of Standards and Technology
ATC-114 Development of Accurate Models and Efficient Simulation Capabilities for Collapse Analysis to Support Implementation of Performance Based Seismic Engineering. This task has been completed and produced four reports: NIST GCR 17-917-45, NIST GCR 17-917-46v1, NIST GCR 17-917-46v2, and NIST GCR 17-917-46v3 National Institute of Standards and Technology
ATC-115 Development of a Roadmap for the use of high-strength reinforcement in reinforced concrete design. This task has been completed and produced the ATC-115 report, Roadmap for the Use of High-Strength Reinforcement in Reinforced Concrete Design. Charles Pankow Foundation
ATC-118 Development of a Emergency Power for Critical Facilities Guidance Publication. This task has been completed and produced the FEMA P-1019 report, Emergency Power for Critical Facilities: A Best Practices Approach to Improving Reliability. Federal Emergency Management Agency
ATC-119 Series Seismic Safety and Engineering Consulting Services for the Earthquake Safety Implementation Program (ESIP) City and County of San Francisco
ATC-120 Series Seismic Analysis and Design of Nonstructural Components and Systems National Institute of Standards and Technology
ATC-121 Development of Technical Brief on Structural Design Issues – Steel Buckling-Restrained Braced Frames. This task has been completed and produced the NIST GCR 15-917-34 report, Technical Brief No. 11, Structural Design Issues: Seismic Design of Steel Buckling-Restrained Braced Frames, A Guide for Practicing Engineers National Institute of Standards and Technology
ATC-122 Series Reducing the Risk to our Schools from Natural Hazards and Improving the Safety of Our Children. This task has been completed and produced the report, FEMA P-1000, Safer, Stronger, Smarter: A Guide to Improving School Natural Hazard Safety Federal Emergency Management Agency
ATC-124 Series Update of Seismic Retrofitting Guidance Federal Emergency Management Agency
ATC-125 Recovery Advisories for the South Napa Earthquake Federal Emergency Management Agency
ATC-126 ATC Project, Community Resilience of Lifeline Systems, produced the NIST CGR 16-917-39 report, Critical Assessment of Lifeline System Performance: Understanding Societal Needs in Disaster Recovery National Institute of Standards and Technology
ATC-127 User-Needs Workshop for the National Seismic Hazard Mapping Project U.S. Geological Survey
ATC-128 Proceedings of Forum on Performance-Based Structural-Fire Engineering: Examples of Current Practice and Discussion on Future Directions Applied Technology Council (ATC) and
ATC Endowment Fund
ATC-129 Development of Updated Standards of Seismic Safety for Existing Federally Owned and Leased Buildings National Institute of Standards and Technology
ATC-130 Updates of NEHRP Seismic Design Technical Briefs 1-3 National Institute of Standards and Technology
ATC-131 Development of Technical Brief on Structural Design Issues: Seismic Design of Cold-Formed Steel Lateral Load Resisting Systems National Institute of Standards and Technology
ATC-132 Practical Guidelines and Training for Ensuring Seismic Safety of Schools in the Republic of Armenia (Report available in English and Armenian) World Bank, Global Program for Safer Schools
ATC-133 Development of Technical Brief on Structural Design Issues: Seismic Design of Precast Concrete Diaphragms produced the NIST GCR 17-917-47 report, NEHRP Seismic Design Technical Brief No. 13, Seismic Design of Precast Concrete Diaphragms, A Guide for Practicing Engineers National Institute of Standards and Technology
ATC-135 Improving the Alternate Rigid-Wall Flexible-Diaphragm Building Design Procedure Federal Emergency Management Agency
Websites for
Geographic
Based Design
Load Parameters
Websites for Geographic Based Design Load Parameters: Ground Snow Loads and Windspeed. Applied Technology Council (ATC) and
ATC Endowment Fund

Print